Menu

Connection Systems

Sort by
Display items per page

Thermopin

THERMOPIN
From €416.69
The ThermoPin securing anchor system is a glass fibre reinforced plastic (GFRP) connecting anchor for sandwich walls and core-insulated double walls. The ThermoPin securing anchor system is used to connect facing and load-bearing layers for core-insulated concrete parts. The GDRP material is suitable for use in narrow structural elements. Thanks to the attached cap, the bar slides smoothly into the fresh concrete, enabling particularly fast assembly. The fixed plastic ring guarantees correct installation and ensures that the fastening point in the insulation is sealed and concrete cannot flow into the opening. As a result, the bar ultimately disappears in the concrete and is not visible on the surface. The Result is perfect surfaces without visible flaws. ThermoPins feature conical openings at the ends to increase resistance to pulling out. A particularly high tensile strength is achieved by using exclusively complete and intact glass fibres along the axis rod. The ThermoPin securing anchor system is available in 2 designs: horizontal or diagonal anchor type.

Loop Box

LOOPBOX
From €2.01
Wire Loop boxes are installed to the formwork according to spacing needed to bear the shear loads, before the panel is cast. After removing the formwork, protective tape is removed and the loop is opened with for example, a hammer or a pin. Pair of boxes and the vertical rebar installed into loops form a joint which resists vertical shear forces, together with the concrete grout in the joint.